DC-DC Converter| 9-36 VDC In | 90 Watt | 802.3af/at/bt

Click image to zoom

The model PDCPOEVA90BT is a DC to DC converter with power-over-Ethernet (PoE) output. This product was designed and manufactured in the USA by AIR802 for use in applications where between 9 and 36 vdc voltage input exists and the equipment being installed requires a IEEE 802.3bt power source. This model is also backwarks compatible with 802.3af or 802.3at. This model is designed for DIN rail mounting.

There are two shielded Ethernet jacks on the top of the device. One jack is labeled, "Network" for network connectivity and will ordinarily connect to a switch, router, computer or other device as desired. The other jack is labeled, "Equip + PoE" and is the output jack with 56vdc to the powered device (PD).

This model detects and automatically supports 802.3bt with Gigabit througput.

Applications:

• Wireless access points

• Surveillance cameras including Axis cameras

• IP telephones

• Transportation sector: automobile, truck fleets, buses, trains

• Marine: ships, yachts

• Industrial: oil and gas wells, wireless service providers

• Any scenario where 9-36 vdc input is available, whether from solar panels or other sources and

output requirement is 802.3bt up to 90 watts

Specifications

POWER INPUT
Input DC Voltage Range	9 to 36 vdc
Maximum Input Current Draw	8.5A Maximum (at 9 vdc)
Turn On Voltage	8.5 vdc +/- 5%
Turn Off Voltage	8.00 vdc +/- 5%
Shut Down Voltage	39V +/- 5%
Reverse Voltage Protected	Yes
Input DC Connector	Screw Terminal (12 awg max)
POWER OUTPUT
Dual Signature PD Support	Yes
Output DC Voltage	56 vdc +/- 5%
Maximum Output Current Draw	1.25A
Maximum Power	90 watts
Line Regulation	1%
Load Regulation	5%
Noise	1%
Short Circuit Protection	Yes
Over Current Protection	Yes
Over Voltage Protection	Yes
ENVIRONMENTAL
Operating Temperature	-40℃ to 65℃ (-40º to 150ºF)
Humidity	5 to 90% RH
AGENCY APPROVALS
Standards	FCC / EN55022 Class B CE (European Conformity) ICES-003:2004 Digital Apparatus (Industry Canada) A
MECHANICAL
Mounting	DIN Rail
Enclosure Material	PC UL 94 V-0
Dimensions - Height	10cm (3.9 inches)
Dimensions - Depth	9cm (3.5 inches) *from DIN rail mount to edge of DC connector
Dimensions - Width	4cm (1.5 inches)
Weight	224 grams (7.9 ounces)