UHF Female Connector | SO-239 | LMR600 Type Cable | AIR802
Home :: ● CONNECTORS - ADAPTERS :: UHF (PL259-SO239) :: UHF Jack-Female or SO-239 Coaxial Connector for AIR802 CA600 or Times Microwave LMR-600 Cable
Printable

UHF Jack-Female or SO-239 Coaxial Connector for AIR802 CA600 or Times Microwave LMR-600 Cable

Click image to zoom
Product Description - Model CN6UHFJ
 
This AIR802® connector is an UHF Jack (Female) or SO-239 style connector for AIR802® CA600, Times Microwave LMR600® or similar cables. The center pin can be soldered or may be crimped with our TL-CRIMP06-2 crimp tool.

In order to provide superior performance and longevity AIR802® has designed and manufactured this premium connector with tri-metal Albaloy (Copper/Tin/Zinc) plated brass. Standard connectors are nickel or silver plated brass. This tri-metal (Albaloy) is a premium class connector providing the best possible performance. Now you can have both corrosion resistant and low Intermodulation distortion (IMD) characteristics in one product. We provide the following chart to illustrate the positive and negative characteristics of each plating type.

 
Plating Material Pro Con
Silver Low Intermodulation Distortion (IMD)
Expensive
Low Corrosion Resistance
     
     
     
Nickel
Less Expensive
Good Corrosion Resistance
Potential Intermodulation Distortion (IMD) in N and
Other Large Size Connectors
     
     
     
Tri-Metal Albaloy (Copper/Tin/Zinc)
Corrosion Resistant
Low Intermodulation Distortion (IMD)
 Expensive

AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio. 

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.  
 
UHF style connectors are used for lower band frequencies such as ham radio, CB, etc. up to 300 MHz.

Specifications

 

ELECTRICAL  
Impedance Non-Constant
Frequency Range DC ~ 300 MHz
Voltage Rating 500 Volts Peak
Dielectric Withstanding Voltage 1000 Volts RMS
Insertion Loss < 0.20 dB  
MATERIAL  
Body Tri-Metal Albaloy (Copper/Tin/Zinc) Plated Brass
Contact Gold Plated Brass
Insulator TFE
Ferrule Tri-Metal Albaloy (Copper/Tin/Zinc) Plated Brass
MECHANICAL  
Cable Attachment Hex Braid Crimp
Center Conductor Attachment Solder or Crimp (via a new tool to be released approx 0ct 1, 2010)
Cable Retention 60 lbs. Pull
Mating 5/8 - 24 UNEF Threading Coupling
Mating Torque 15 inch pounds Maximum
ENVIRONMENTAL  
Temperature -67°F to 185°F (-55°C to 85° C)
RoHS Compliant Yes
Corrosion MIL-Std. 202 Method 101 (Test Condition C)
Temperature Cycling MIL-Std. 202 Method 102 (Test Condition C)
Altitude MIL-Std. 202 Method 105 (Test Condition C)
Vibration MIL-Std. 202 Method 204 (Test Condition B)
Moisture Resistance MIL-Std. 202 Method 106 (Test Condition B)

 

 

Download PDF Connector Drawing

Product Warranty

This connector is of absolute quality and is fully covered under by the AIR802 LLC Limited Warranty.
Details
SKU CN6UHFJ
Weight 0.12 lbs
 
Our price: USD $12.75
Options
Quantity
UHF jack-female or SO-239 crimp connector for AIR802 CA600, Times Microwave LMR600 or similar sized coaxial cables

UHF jack-female or SO-239 crimp connector for AIR802 CA600, Times Microwave LMR600 or similar sized coaxial cables


UHF jack-female or SO-239 crimp connector for AIR802 CA600, Times Microwave LMR600 or similar sized coaxial cables

UHF jack-female or SO-239 crimp connector for AIR802 CA600, Times Microwave LMR600 or similar sized coaxial cables


Three Blades Coaxial Stripper for CA400 / LMR400 Sized Cables
Crimp Tool (400 Series Coaxial Cable & Other Types)
UHF Plug-Male or PL-259 Crimp Connector for Cable Types: RG8, AIR802 CA400, Times Microwave LMR400, Belden 9913 & 7810
Three Blades Coaxial Stripper for CA400 / LMR400 Sized Cables Crimp Tool (400 Series Coaxial Cable & Other Types) UHF Plug-Male or PL-259 Crimp Connector for Cable Types: RG8, AIR802 CA400, Times Microwave LMR400, Belden 9913 & 7810
USD $17.50
USD $46.00
USD $3.95
 
UHF Plug-Male or PL-259 Coaxial Connector for AIR802 CA600 or Time Microwave LMR-600 Cable
UHF Plug-Male or PL-259 Coaxial Connector for AIR802 CA600 or Time Microwave LMR-600 Cable
USD $12.62
AIR802, LLC, Electronic Equipment & Supplies - Wholesale & Manufacturers, Naperville, IL UL intertek View AIR802 profile on Ariba Discovery
Copyright © 2006-2024 AIR802
1981 D Wiesbrook Drive
Oswego, IL 60543 USA
Tel: +1 (630) 966-2501

sales@air802.com

 

http://www.air802.com - AIR802 manufactures professional, reliable and high quality wireless and cable products. You may source our products direct or through distributors and resellers. Our wireless products include Wi-Fi antennas, cellular antennas, antenna cable assemblies-jumpers-pigtails, bulk coax cable, bulk Ethernet CAT5e and CAT6 cable, CAT6 Ethernet patch cords, fiber optic patch cords, power-over-Ethernet (PoE) injectors and splitters, wireless access points or routers, gigabit switches and coaxial connnectors.
http://www.air802.com covers USA, Canada, Mexico, Chile, Columbia, Peru, Argentina, Brazil, UK, Australia.