PoE Power over Ethernet | Passive Splitter Kit | 5.5 mm x 2.5 mm
Home :: ● POE: INJECTOR-SPLITTERS :: Passive Power-over-Ethernet (PoE) Injector - Splitter Mid-Span Kit with 5.5 mm x 2.5 mm DC Size Connectors

Passive Power-over-Ethernet (PoE) Injector - Splitter Mid-Span Kit with 5.5 mm x 2.5 mm DC Size Connectors

Click image to zoom
Product Description -  Model POEPASS-02
 
AIR802® has developed passive Power-over-Ethernet (PoE) kits or sets with various size DC connectors. This device provides a low cost solution for delivering power over the network cable. This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable. The source power could be the power supply that came with the wireless access point, IP video surveillance camera, etc. or it might be another power supply.
 
This PoE set contains a very cost effective injector and breakout or splitter component.
  • The injector inserts the DC voltage at the source location into the 5.5mm x 2.5mm injector plug.
  • The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable.
  • The breakout or splitter extracts the DC voltage from the network cable onto the 5.5mm x 2.5mm splitter jack.

At AIR802 we offer this product in two other DC connector sizes (5.5 mm x 2.1 mm) and (3.5 mm x 1.35 mm). If you have an application requiring another size, please contact our office.  

As a professional engineering company, we can't specify any precise operating distance. Determining the distance in any given scenario is an electrical calculation that would require knowledge of the wire gauge being used, the input voltage and current. However it is possible to achieve up to the full length of an Ethernet network cable at 100 meters (328 feet), if for example the input voltage and current was high enough to accommodate the voltage drop. The input voltage drops over the distance of a wire and will be less at the output. Use of a larger wire size (AWG) such as 23 AWG instead of the smaller 24 AWG can allow more distance as well as can using a replacement power supply with slightly higher voltage output to compensate for any voltage drop (loss) over the length of cable.
Basic Power-over-Ethernet (PoE) Information:
 
  • Power-over-Ethernet (PoE) is commonplace and very useful allowing DC power voltage to be carried through a CAT5, CAT5E, or CAT6 type cable.
  • This eliminates the need for an AC power outlet nearby any equipment being installed in ceilings, on outside walls or other locations, where power outlets are not conveniently installed.
  • Under the right conditions, i.e. with higher voltages such as 48vdc versus 5vdc then power may be carried over the 100 meter (328 feet) distance limitation of a single network cable run.
  • This kit is for use with non IEEE 802.3af/at PoE or passive PoE devices.
  • Voltage is applied from pins 4,5,7 and 8 (spare pairs) of the Ethernet network cable.
Applications of the Passive Power-over-Ethernet (PoE) Injector - Splitter Mid-Span Kit with 5.5 mm x 2.5 mm DC Size Connectors:
• IP Telephones
• WLAN Access Points
• Bluetooth Access Points
• IP Surveillance Cameras
• Data Collection, Time and Attendance Control
• HVAC and Lighting Controls
• Badge/Card Readers
• RFID
• 802.11 WLAN   Bridges and CPE
• 802.16 WiMAX
 
Specifications

 

Injector Plug
5.5mm x 2.5mm
Splitter Jack
5.5mm x 2.5mm
Overall Length
19 cm (7.5 inches).
Network Type
10BASE-T, 100BASE-T
Data Pins
1&2 and 3&6
Power Pins
4&5 and 7&8
Input Voltage Max
Up to 60VDC
Output Voltage Max Up to 60VDC
Operating Temperature -40°C ~ 60°C   (-40°F ~ 140°F)

 

 

Pin Input Output Pin
1 Tx (+) Tx (+) 1
2 Tx (-) Tx (-) 2
3 Rx (+) Rx (+) 3
4 N.C. +48V 4
5 N.C. +48V 5
6 Rx (-) Rx (-) 6
7 GND GND 7
8 GND GND 8

 

 
Terminology Note: Due to differences in terminology this product may be referred to as: passive poe, passive power-over-ethernet, mid-span poe, mid-span power over ethernet, midspan poe, mode A or mode B, non-802.3af, or pre-802.3af.
Details
SKU POEPASS-02
Weight 0.12 lbs
 
Our price: USD $6.00
Options
Quantity
POEPASS-02 PoE Passive Injector-Splitter Kit -5.5 x 2.1 mm Connector Size

POEPASS-02 PoE Passive Injector-Splitter Kit -5.5 x 2.1 mm Connector Size


POEPASS-02 PoE Passive Injector-Splitter Kit - 5.5 x 2.1 DC Connector Size

POEPASS-02 PoE Passive Injector-Splitter Kit - 5.5 x 2.1 DC Connector Size


POEPASS-02 PoE Passive Injector-Splitter Kit Packaging

POEPASS-02 PoE Passive Injector-Splitter Kit Packaging


: *
: *
: *
 
POEPASS-02 PoE Passive Injector-Splitter Kit -5.5 x 2.1 mm Connector Size

POEPASS-02 PoE Passive Injector-Splitter Kit -5.5 x 2.1 mm Connector Size


POEPASS-02 PoE Passive Injector-Splitter Kit - 5.5 x 2.1 DC Connector Size

POEPASS-02 PoE Passive Injector-Splitter Kit - 5.5 x 2.1 DC Connector Size


POEPASS-02 PoE Passive Injector-Splitter Kit Packaging

POEPASS-02 PoE Passive Injector-Splitter Kit Packaging


AIR802, LLC, Electronic Equipment & 
Supplies - Wholesale & Manufacturers, Naperville, IL UL intertek View AIR802 profile on Ariba Discovery
2570 Beverly Drive, #140
Aurora, IL 60502 USA
Tel: +1 (630) 585-6383
Fax: +1 (630) 585-0657
sales@air802.com
Av Fermin Vivaceta 2102
Independencia
Santiago, Chile
Tel: (+56 2) 2 455 09 75
Fax: (+56 2) 2 455 09 76
ventas@air802.com
http://www.air802.com - AIR802 manufactures professional, reliable and high quality wireless and cable products. You may source our products direct or through distributors and resellers. Our wireless products include Wi-Fi antennas, cellular antennas, antenna cable assemblies-jumpers-pigtails, bulk coax cable, bulk Ethernet CAT5e and CAT6 cable, CAT6 Ethernet patch cords, fiber optic patch cords, power-over-Ethernet (PoE) injectors and splitters, wireless access points or routers, gigabit switches and coaxial connnectors.
http://www.air802.com covers USA, Canada, Mexico, Chile, Columbia, Peru, Argentina, Brazil, UK, Australia.