N Jack Female Bulkhead Coaxial Crimp Connector

Click image to zoom

AIR802® model CN1NFB is a N Jack Female crimp connector sized to fit AIR802 CA100, Times Microwave LMR100, RG316, RG174 and RG188 cable.

AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating, cable size or type and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

This connector is a N Jack Female for 100-series cable. Connectors can be a very confusing regarding the gender. The N Jack is a female connector. The threads are on the outside and a center pin protrudes from inside the connector. This causes confusion for many not familiar with various connector types leading them to believe that this is the male, however it is the female. This is why we prefer the term plug and jack in order to avoid confusion. For further clarification see our connector identification chart in the Knowledge Center area of our web site.

Specifications

ELECTRICAL
Impedance	50 ohms
Frequency Range	DC to 6 GHz
Voltage Rating	500 Volts Peak
Dielectric Withstanding Voltage	1000 Volts RMS
Insertion Loss	.15 dB Max.
MATERIAL
Body	Nickel Plated Brass
Contact	Gold Plated Brass
Insulator	TFE
Ferrule	Gold Plated Brass
Nut	Nickel Plated Brass
Washer	Nickel Plated Brass
Gasket	Red Silicon Rubber
MECHANICAL
Cable Attachment	Hex Braid Crimp
Center Conductor Attachment	Solder
Cable Retention	20 lbs. Pull
Mating	1/4 - 36 UNEF Threaded Coupling
Mating Torque	7 to 10 inch pounds Maximum
ENVIRONMENTAL
Temperature	-67°F to 185°F (-55°C to 85° C)
RoHS Compliant	Yes
Corrosion	MIL-Std. 202 Method 101 (Test Condition B)
Temperature Cycling	MIL-Std. 202 Method 102 (Test Condition C)
Altitude	MIL-Std. 202 Method 105 (Test Condition C)
Vibration	MIL-Std. 202 Method 204 (Test Condition D)
Moisture Resistance	MIL-Std. 202 Method 106 (Test Condition B)