Multi-Voltage PoE Injector |6, 7.5, 9, 12vdc 2.5A | NA Cord
Home :: ● POE: MIDSPAN INJECTORS :: Multi-Voltage PoE Mid-Span Injector with User Selectable 6, 7.5, 9, 12vdc 2.5A Output with North American Power Cord

Multi-Voltage PoE Mid-Span Injector with User Selectable 6, 7.5, 9, 12vdc 2.5A Output with North American Power Cord

Click image to zoom

Model PSA612V-NA-B

The AIR802 model PSA612V-NA-B is an power over Ethernet (PoE) injector or midspan power adapter with four user selectable output voltages to choose from:  6, 7.5, 9 or 12vdc with 2.5A. This product is excellent for use with non-PoE security cameras in conjunction with our passive PoE splitter/injector kits. Or it can be used in a wide variety of applications with our modular to screw terminal adapter.

 

Aplications

• Access Points and Routers

• Non PoE Security Cameras

• Non Ethernet Applications with our Modular Plug to Screw Terminal Adapter (AD-POEMODSCREW)

Any other device that requires passive voltage and a 10/100 Ethernet interface   

Basic Power-over-Ethernet (PoE) Information

PoE provides great cost savings and flexibility for equipment installation when there is no access to an AC outlet at the location of the equipment. Thus instead of hiring costly licensed electricians to install an outlet one can use PoE over network Ethernet cabling (Cat5e, Cat6, etc.) to transmit the DC voltage from the switch or router location to the equipment being connected, i.e., security surveillance camera, etc.

There are several PoE schemes or standards. Certain devices using the IEEE 802.3af or 802.3at require "toggling" or a resistive change between the power source and the powered device. However numerous access points and security cameras use passive voltage flow without any resistive change. This is generally true particularly for lower end priced items.  

This power injector is generally used in 10/100 Ethernet ports where energy is provided by two unused pairs (4 wires). For example, many security cameras on the market, particularly those in the $100.00 or less price range will follow this scheme. These cameras ship with an AC power supply and are often desired to be installed where there is no direct access to an AC outlet. Utilizing an AIR802 passive PoE splitter/injector kit allow the use of an Ethernet network cable to provide the network connectivity and carry the power. At the switch or router end, our injector would connect to the data port and power supply. Data and power would flow over the network cable to the far end, for example a camera. At the camera end the splitter would connect to the cable and split out the data and power connections. This is fine to a point. Typically these types of security cameras utilize a 5vdc ouput power supply. Depending on variables such as the current, wire AWG size, etc. it might only be operable over a 20 feet length of cable. This is due to voltage drop. If only 4.5 vdc arrives at the camera it may be insufficient to operate the camera. That is where our PSA612V-NA-B comes in. Instead of using the power supply that came with the camera, utilze our selectable voltage output device. Start with the lowest voltage option,  6vdc and check if the camera is working. If not slide the switch to the next highest voltage output and continue until the camera is operational. NEVER start with the highest voltage and then lower it!   

 

Specifications

 

Output Voltage Selection

6, 7.5, 9 or 12 VDC

Output Rating

2.5A

Input Voltage

100 a 240 (Min=90, Max=264)

Input Frequency

50 / 60 Hz (Min=47, Max=63Hz)

Input Current

0.7A Maximum @ 90V at Full Load

Input Protection

2A Internal Fuse

Line Regulation

+/- 1%

Load Regulation

+/- 5%

Output Current Protection

Automatic Recovery

Output Short Circuit Protection

Automatic Recovery

Operating Temperature

0 to 40°C (32 to 104°F)

Operating Relative Humidity

20%RH to 80%RH

Storage Temperature

-20 to +85°C (-4 to 185°F)

Safety

UL, cUL, CE/EN 60950-1:2006

EMI/EMC

FCC, CE

Dimensions

Height=117.38 mm (4.6"),

Width=52.05 mm (2"), Depth=35.2 mm (1.38") 

Weight

170 grams (5.9 ounces) *without power cable

RoHS Compliant

Yes

 

 

Pin

Input (Data Port)

Output (Power + Data Out Port)

Pin

1

Tx (+)

Tx (+)

1

2

Tx (-)

Tx (-)

2

3

Rx (+)

Rx (+)

3

4

N.C.

+vdc

4

5

N.C.

+vdc

5

6

Rx (-)

Rx (-)

6

7

GND

-vdc

7

8

GND

-vdc

 

Details
SKU PSA612V-NA-B
Weight 0.80 lbs
 
Our price: USD $29.95
Options
Quantity
PSA612V Multi-Voltage PoE Mid-Span Injector with Four Selectable Voltage Outputs

PSA612V Multi-Voltage PoE Mid-Span Injector with Four Selectable Voltage Outputs


PSA612V Passive Power over Ethernet PoE Application Pictorial

PSA612V Passive Power over Ethernet PoE Application Pictorial


PSA612V Multi-Voltage PoE Mid-Span Injector with Four Selectable Voltage Outputs

PSA612V Multi-Voltage PoE Mid-Span Injector with Four Selectable Voltage Outputs


PSA612V Passive Power over Ethernet PoE Application Pictorial

PSA612V Passive Power over Ethernet PoE Application Pictorial


AIR802, LLC, Electronic Equipment & 
Supplies - Wholesale & Manufacturers, Naperville, IL UL intertek View AIR802 profile on Ariba Discovery
1981 D Wiesbrook Drive
Oswego, IL 60543 USA
Tel: +1 (630) 966-2501

sales@air802.com

 

http://www.air802.com - AIR802 manufactures professional, reliable and high quality wireless and cable products. You may source our products direct or through distributors and resellers. Our wireless products include Wi-Fi antennas, cellular antennas, antenna cable assemblies-jumpers-pigtails, bulk coax cable, bulk Ethernet CAT5e and CAT6 cable, CAT6 Ethernet patch cords, fiber optic patch cords, power-over-Ethernet (PoE) injectors and splitters, wireless access points or routers, gigabit switches and coaxial connnectors.
http://www.air802.com covers USA, Canada, Mexico, Chile, Columbia, Peru, Argentina, Brazil, UK, Australia.