Welcome to AIR802

The AIR802® ANMMGP5GNMOB is a mobile 5G NR low profile black antenna with a NMO connector. The antenna connector pin is not spring loaded and requires a low/high frequency style connector such as our CN2NMOLP, CN2NMOLP-TM and CN2NMOHFR or Larsen connectors. These connectors have a removeable pin.  This antenna is a ground plane design. It covers all 5G NR sub-bands in addition to 4G/LTE frequencies. Manufactured in USA. 

AIR802® part number PDCPOEVA70AT is a DC to DC converter with power-over-Ethernet or PoE output. This model has a 9 to 36 vdc input range and a 56 vdc PoE output with 70 watt support at 12vdc or 90 watt with 24vdc input or higher. It is DIN rail mountable. This unit supports IEEE 802.3af and 802.3at. Manufactured in USA.

AIR802® part number PDCPOEVAVAG2P is simple but very convenient device for connecting a DC voltage source to screw terminals with the output as Gigabit passive PoE. No DC conversion exists, simply the input voltage will equal the output voltage. It is DIN rail mountable. This model provides +vdc on pins 4 & 5 and -vdc on pins 7 & 8. Manufactured in Aurora, Illinois.

AIR802® part number PDCPOEVAVAGDR is simple but very convenient device for connecting a DC voltage source to screw terminals with the output as Gigabit PoE. No DC conversion exists, simply the input voltage will equal the output voltage. It is DIN rail mountable. This model utilizes all 8 conductors to pass the power. Manufactured in Aurora, Illinois.

AIR802® model ANOM2445 is an omni-directional 4.5 dBi gain antenna for the 2.4 GHz bands. This is a mesh style antenna with a N plug or male connector. Our mesh antennas are designed to be directly connected to a wireless access point.  Manufactured in Aurora, Illinois USA. Identical RF performance to the Motorola and Zebra model ML-2499-HPA4-01 with slight exterior design differences. 

AIR802® model ANOM3510M is an omni-directional 10 dBi gain antenna for the 3500 to 3700 MHz (3.5 to 3.7 GHz) band. This is a mesh style antenna with a N plug or male connector. Our mesh antennas are designed to be directly connected to a wireless access point in LTE citizens broadband radio service (CBRS), WiMax or other applications. Manufactured in Aurora, Illinois USA.

Model SP2W7002700NF is an exceptional quality 2-way RF power divider / combiner / splitter with N jack-female connectors for the 698 to 2700 MHz bands. This low PIM model can be used indoors or outdoors and is IP67 rated. Maybe wall mounted or with an optional U-bolt it can be mast or tower mounted for convenience. Manufactured in USA.

This patent pending universal antenna ceiling mount (UCAM-004) has four antenna positions available. It permits a simple and low cost means of of mounting from one to four dipole or rubber duck style antennas to be extended from the bottom side of a commercial drop or false ceiling tile. In it's simplicity it consists of two plastic plates, one on the top of the tile, the other on the bottom of the tile.

The AIR802 model PSA612V-NA-B is an power over Ethernet (PoE) injector or midspan power adapter with four user selectable output voltages to choose from:  6, 7.5, 9 or 12vdc with 2.5A. This product is excellent for use with non-PoE security cameras in conjunction with our passive PoE splitter/injector kits. Or it can be used in a wide variety of applications with our modular to screw terminal adapter.

AIR802 mobile magnet mounts are a revolutionary change from the standard industry made in China products. Our very high quality mounts are custom built each day in the USA with 6 definable input options. 

AIR802® part number PDCPOE1248DR is a DC to DC converter with power-over-Ethernet or PoE output. This model has a 10 to 26 vdc input range and a 48 vdc output as PoE. It is DIN rail mountable. This unit supports passive PoE or IEEE 802.3af Mode B PoE. Manufactured in USA.